Cordless impact wrench

∙ Maximum loosening torque: 700 Nm ∙ Square, solid 12.5 mm (1/2 inch) ∙ Number of tools: 3
  • 9212-3
  • 4000896203444

Product information

Application:
Work independently

  • High efficiency thanks to brushless motor
  • 3-piece set, Contents:
    Cordless impact wrench, battery charger, Li-Ion battery (1x)

18 V, 5 Ah

  • Three selectable performance levels for torque screw tightening
    Level 1: approx. 80 Nm at 600 rpm at ~1700 strokes per minute
    Level 2: approx. 300 Nm at 1400 rpm at ~2500 strokes per minute
    Level 3: approx. 500 Nm at 2000 rpm at ~3400 strokes per minute
  • With illumination of the work area before the output begins to move
  • Li-ion battery with very low self-discharge (only 2%) compared to a standard NiMH battery (15 - 25%)
  • Amperage without load: 5.5 A
  • Replacement battery: 9212-05
  • Net weight: 1.857 kg (without battery pack)
  • Battery net weight: 0.659 kg
  • Battery charger net weight: 0.66 kg
  • Case net weight: 4.352 kg
  • Dimensions incl. battery: 204 x 64 x 259 mm
  • Including belt clip, attachable on both sides
  • Brushless DC motor (BLDC)
    - Longer lifetime, less wear, no change of the carbon brushes required
    - Greater efficiency and thus less battery consumption
    - More compact motor allows for smaller installation dimensions
  • Recommended torque: 500 Nm
  • Sound power level: 110.4 db(A) Lp W
  • Vibration acceleration: 20.30 m/s2
  • Screw size M: 16
  • Forward and reverse: multi-stage (right/left)
  • Plastic box
  • Total length: 204 mm
  • Height: 259 mm
  • Width: 64 mm
  • Output: Square, solid 12.5 mm (1/2 inch)
  • Net weight: 1.86 kg
  • Tightening torque max.: 500 Nm
  • Maximum loosening torque: 700 Nm
  • Sound pressure level: 99.4 dB(A) Lp A
  • Revolutions per minute: 0 – 2000

Do you know – Li-Ion batteries:

  • Do not have any memory effect
  • Consist of cells with 3.6 V each
  • After full charge they have a higher voltage than 3.6 V i.e. 5 cells each 3.6 V = 18 V – but after full charge a peak voltage of up to 20 V is possible
    Attention: For a longer lifetime of the battery please store it charged up to 50 to 80% only
  • Have an energy density which is twice as high as nickel cadmium batteries, for example
  • Have a nominal voltage three times higher than a nickel metal hydride battery
  • Require multiple complete charging cycles to reach full capacity
  • Number of tools: 3

Technical data

  • Forward/reverse : multi-stage (right/left)
  • Height : 259 mm
  • Idle speed : upm
  • Length : 204 mm
  • Loosening torque max. : 700 Nm
  • Net weight : 1.857 kg
  • Number of tools : 3
  • Output : i 12,5 = 1/2″
  • Recommended torque : 500 Nm
  • Revolutions per minute : 0 – 2000
  • Screw size M : 16 M
  • Sound power level : 110.4 db(A) Lp W
  • Sound pressure level : 99.4 dB(A) Lp A
  • Tightening torque max. : 500 Nm
  • Total length : 204
  • Vibration acceleration : 20.3 m/s2
  • Width : 64 mm

Print

Are you familiar with our HAZET spare parts shop?

To the spare parts shop

Should you require spare parts that are not listed in our sales documents or in our spare parts shop, please contact our service centre. Our service centre is also happy to be your initial contact partner for complaints.

Service Centre
Telephone +49 (0)21 91 / 7 92-355
Fax +49 (0)21 91 / 7 92-523
service-center@hazet.de

Office hours
Mon.-Thu.: 6.45-15.30 GMT
Fri.: 6.45-12.00 GMT

More interseting products

Impact socket set
Impact socket set ∙ Square, hollow 12.5 mm... HAZET-No.: 903SPC/3
Tyre inflator
Tyre inflator HAZET-No.: 9041-1
Impact wrench, extra short
Impact wrench, extra short ∙ Maximum loosening... HAZET-No.: 9012M
Jack-knife
Jack-knife HAZET-No.: 2157-1
Kneeling mat
Kneeling mat HAZET-No.: 195-1
“BitE”-box – screwdriver bit set
“BitE”-box –... ∙ Pozidriv profile PZ,... HAZET-No.: 2240N/51