Cordless impact wrench

Maximum loosening torque: 700 Nm ∙ Square, solid 12.5 mm (1/2 inch) ∙ Number of tools: 3
  • 9212-3
  • 4000896203444

Product information

Application:
Work independently

  • High efficiency thanks to brushless motor
  • 3-piece set, in case:
    1 cordless impact wrench
    1 quick charger (40 minutes)
    1 Li-ion rechargeable battery 18 V, 5.0 Ah
  • 18 V, 5 Ah
  • There are three power stages to choose from for torque acceleration:
    Stage 1 80 Nm at 0 – 600 rpm (0 – 1200 impacts/min)
    Stage 2 300 Nm at 0 – 1400 rpm (0 – 2500 impacts/min)
    Stage 3 500 Nm at 0 – 2000 rpm (0 – 3400 impacts/min)
  • Illumination of the work area before the output begins to move
  • Li-Ion rechargeable battery with very low self-discharge (only 2%) compared to a standard NiMH rechargeable battery (15 – 25%)
  • Amperage without load: 5.5 A
  • Replacement battery: 9212-05
  • Net weight: 1.86 kg (without rechargeable battery)
  • Battery net weight: 0.66 kg (only set 9212-3)
  • Battery charger net weight: 0.66 kg (only set 9212-3)
  • Case net weight: 4.35 kg (only set 9212-3)
  • Dimensions including rechargeable battery: 204 x 64 x 259 mm
  • Including belt clip, attachable on both sides
  • Brushless DC motor (BLDC)
    • Longer service life, less wear, no need to change the carbon brushes
    • High efficiency and hence less battery consumption
    • More compact motor enables smaller dimensions
  • Recommended torque: 500 Nm
  • Sound power level: 110.4 db(A) Lp W
  • Vibration acceleration: 20.30 m/s2
  • Loosening torque (max) determined with screw size M: 16
  • Forward and reverse: multi-stage (right/left)
  • Plastic box
  • Output: Square, solid 12.5 mm (1/2 inch)
  • Dimensions / length: 204 mm x 64 mm x 259 mm
  • Net weight: 1.86 kg
  • Tightening torque max.: 500 Nm
  • Maximum loosening torque: 700 Nm
  • Sound pressure level: 99.4 dB(A) Lp A
  • Revolutions per minute: 0 – 2000

Do you know – Li-Ion batteries:

  • Do not have any memory effect
  • Consist of cells with 3.6 V each
  • After full charge they have a higher voltage than 3.6 V i.e. 5 cells each 3.6 V = 18 V – but after full charge a peak voltage of up to 20 V is possible
    Attention: For a longer lifetime of the battery please store it charged up to 50 to 80 % only
  • Have an energy density which is twice as high as nickel cadmium batteries, for example
  • Have a nominal voltage three times higher than a nickel metal hydride battery
  • Require multiple complete charging cycles to reach full capacity
  • Number of tools: 3

Technical data

  • Width: 64 mm
  • Height: 259 mm
  • Output: 3
  • Tightening torque max.: 500 Nm
  • Number of tools: 3
  • Sound power level (at working pressure): 110.4 db(A) Lp W
  • Forward/reverse: multi-stage (reverse/forward)
  • Max. loosening torque: 700 Nm
  • Recommended torque: 500 Nm
  • Loosening torque (max) determined with screw size M: 16 M
  • Sound pressure level (at working pressure): 99.4 dB(A) Lp A
  • Dimensions / length: 204 mm x 64 mm x 259 mm

Print

Are you familiar with our HAZET spare parts shop?

To the spare parts shop

Should you require spare parts that are not listed in our sales documents or in our spare parts shop, please contact our service centre. Our service centre is also happy to be your initial contact partner for complaints.

Service Centre
Tel. +49 (0) 21 91 / 7 92-355
Fax +49 (0) 21 91 / 7 92-523
service-center@hazet.de

Service times
Mon – Thur: 6.45 a.m. – 3.30 p.m.
Fri: 6.45 a.m. – 12.00 p.m.

More interesting products

Kneeling mat
Kneeling mat HAZET-No.:195-1
Impact socket set
Impact socket set Square, hollow 12.5 mm (1/2 inch) ∙ Outside hexagon Traction profile ∙ 17 – 21 ∙ Number of tools: 3 HAZET-No.:903SPC/3
Screwdriver bit set
Screwdriver bit set Pozidriv profile PZ, Hexagon, hollow 6.3 (1/4 inch), Cross recess profile PH, … HAZET-No.:2240N/51
Tyre inflator
Tyre inflator HAZET-No.:9041-1
Jack-knife
Jack-knife HAZET-No.:2157-1
Magnetic cup ∙ 150 mm ⌀
Magnetic cup ∙ 150 mm ⌀ 150 mm HAZET-No.:197-3
Impact wrench ∙ extra short
Impact wrench ∙ extra short Maximum loosening torque: 1100 Nm ∙ Square, solid 12.5 mm (1/2 inch) ∙ Single hammer striking mechanism HAZET-No.:9012M