Torque wrench ∙ with protective insulation

Tightening torque min-max: 20 – 120 Nm ∙ Tolerance: 4 % ∙ Square, solid 1/2 inch (12.5 mm)
  • 5121KV
  • 4000896233397

Product information

  • Can be calibrated
  • Long service life / high accuracy
  • Option of:
    • Removal
    • Repair (if necessary)
    • Installation
    • Adjustment
    • Calibration
  • Note: adjustment, possible repairs with removal/installation of the KV torque wrench only in the HAZET Service Center
  • Suitable for control of inspection and test equipment
  • Sustainable and environmentally sound
  • Safety:
    • Haptic (close-gap release)
    • Audible ("click" sound)
  • Right/left release by plug-in square,
    thereby tightening at torque setting, both to the right and to the left within the specified tolerance
  • Low weight for good handling and fatigue-free work

Product design features

  • Slim design in strict accordance with the required insulating properties (material strength/overlaps)
  • Smooth transitions on switching and moving parts with ergonomic handle design and calibration notch
  • Uniform look even when using other components (e.g. red insulated sockets)
  • Attractive colour design of the housing and head with signal colours red/yellow
  • Handle colour in black to make a distinction with the colour and to prevent it appearing dirty quickly
  • No disturbing projecting parts (e.g. shift lever)
ATTENTION:
Repairs may only be carried out by the HAZET Service Center, as repair works must be followed by a 10,000 V routine test in accordance with IEC 60900
  • DIN EN ISO 6789-2:2017, DIN 3120, ISO 1174-1, IEC 60900:2018
  • Made in Germany
  • Output: Square, solid 1/2 inch (12.5 mm)
  • Dimensions / length: 420 mm
  • VDE protective insulation up to 1000 V
  • Tightening torque min-max: 20 – 120 Nm
  • Tolerance: 4 %
  • Scale Graduation (Nm): 1 Nm
  • Actuating force min.-max. kg: 6.0 – 37.4 kg
  • Number of teeth: 32 (Opening angle 11.25°)
  • No more turning back: Continuous long-term tests on the 5000 series and 6000 series of HAZET torque wrenches have demonstrated that turning them back to the smallest scale value is not required

Technical data

  • Output: 3
  • Scale graduation (Nm): 1 Nm
  • Tolerance: 4 %
  • Standard: DIN 3120, DIN EN ISO 6789-2:2017, IEC 60900:2018, ISO 1174-1
  • Dimensions / length: 420 mm
  • Protective insulation: VDE protective insulation up to 1000 V
  • Number of teeth: 32 teeth
  • Operating angle: 11.25 °
  • Tightening strap height: 120 Nm
  • Luminous flux 100%: 20 Nm

Print

Are you familiar with our HAZET spare parts shop?

To the spare parts shop

Should you require spare parts that are not listed in our sales documents or in our spare parts shop, please contact our service centre. Our service centre is also happy to be your initial contact partner for complaints.

Service Centre
Tel. +49 (0) 21 91 / 7 92-355
Fax +49 (0) 21 91 / 7 92-523
service-center@hazet.de

Service times
Mon – Thur: 6.45 a.m. – 3.30 p.m.
Fri: 6.45 a.m. – 12.00 p.m.

More interesting products

Torque wrench
Torque wrench Tightening torque min-max: 2.5 – 25 Nm ∙ Tolerance: 3 % ∙ Square, solid 1/4 inch (6.3 mm) HAZET-No.:5108-3CT
Tool assortment ∙ with protective insulation
Tool assortment ∙ with protec... 0,4 x 2,5 – 0,8 x 4 ∙ PH1 – PH2 ∙ Number of tools: 14 HAZET-No.:0-20/14
Screwdriver set ∙ with protective insulation
Screwdriver set ∙ with protec... Pozidriv profile PZ, Cross recess profile PH, Inside hexagon profile, Slot profile ∙ 2,5 x 0,4 – 6,5 x 1,2 ∙ PH1 ∙ PH2 ∙ PZ2 ∙ T10 ∙ T15 ∙ T20 ∙ Number of tools: 14 HAZET-No.:804VDE/14
Offset screwdriver set
Offset screwdriver set Inside hexagon profile ∙ 1,5 ∙ 2 ∙ 2,5 ∙ 3 ∙ 4 ∙ 5 ∙ 6 ∙ 8 ∙ 10 ∙ Number of tools: 9 HAZET-No.:2105LG/9H