Universal engine support

To the Tool Finder
  • 220-1
  • 4000896191758

Product information

Supporting the engine during maintenance work on thrust bearings, timing belts, water pumps or tensioner rollers

  • For transverse engines
  • Suitable for nearly all vehicle types
  • After loosening the engine mount, the engine support safely holds the vehicle engine in the engine compartment (time savings and higher safety at work)
  • Installation of the engine support underneath the motor vehicle allows optimum access during repair work (engine is supported from below). Optimum working conditions in the engine compartment (from above)
  • The most important advantage compared to work with engine lifting beam or engine crane (both are mounted above the engine and may obstruct repair works) is that the engine compartment is freely accessible
  • Note for using engine lifting beams:
    • The fenders of newer vehicles often slope or are made of plastic material. This means that, unlike with the HAZET universal engine support, classic engine lifting beams are often unsuitable and not mountable without damage
  • Rubber covered feet with ball bearings allow flexible adjustment of the engine support
  • Variable length: 620 – 900 mm
  • Including 2 assembly holders
  • Fully galvanised for optimal surface protection
  • Manual operation through T-handles or wing screws
  • Maximum loading capacity: 250 kg
  • Made in Germany
  • Net weight: 8.9 kg

Are you familiar with our HAZET spare parts shop?

To the spare parts shop

Should you require spare parts that are not listed in our sales documents or in our spare parts shop, please contact our service centre. Our service centre is also happy to be your initial contact partner for complaints.

Service Centre
Tel. +49 (0) 21 91 / 7 92-355
Fax +49 (0) 21 91 / 7 92-523

Service times
Mon – Thur: 6.45 a.m. – 3.30 p.m.
Fri: 6.45 a.m. – 12.00 p.m.

More interesting products

Universal axle and slotted nut wrench tool set
Universal axle and slotted nu... Square, hollow 20 mm (3/4 inch) ∙ Number of tools: 16 HAZET-No.:772-2/16
Reversible ratchet ∙ solid steel ∙ for bits
Reversible ratchet ∙ solid st... Hexagon, hollow 6.3 (1/4 inch) HAZET-No.:863MB
Oil filter wrench set
Oil filter wrench set Square, hollow 10 mm (3/8 inch), Square, hollow 12.5 mm (1/2 inch) ∙ Outside hexagon profile ∙ Number of tools: 6 HAZET-No.:2169/6
Turbo charger wrench
Turbo charger wrench Outside 12-point profile ∙ 15 mm HAZET-No.:2849-15
Socket set
Socket set Square, hollow 6.3 mm (1/4 inch), Square, hollow 12.5 mm (1/2 inch) ∙ Outside hexagon traction profile, … HAZET-No.:953HP