VDE torque wrench

Nm min-max: 5 – 25 Nm ∙ Tolerance: 4 % ∙ Square, solid 10 mm (3/8 inch)
  • 5109VDE
  • 4000896200139

Product information

  • Can be readjusted and recalibrated
    Possible repairs to the VDE torque wrenches in the HAZET Service Centre
  • Long service life /accuracy through the option of:
    • Removal
    • Adjustment
    • Repair (if necessary)
    • Calibration
    • Installation
  • Suitable for control of inspection and test equipment
  • Sustainable and environmentally sound
  • Fine scale graduation with vernier scale
  • Locking against unintentional adjustment of the setting value
  • Safety:
    • Haptic (close-gap release)
    • Audible ("click" sound)
  • Right/left release by square box wrench,
    thereby tightening at torque setting both to the right and to the left within the specified tolerance
  • VDE-tested
  • Use of sockets from other manufacturers is possible, provided they conform to the standards IEC 60900 or DIN EN 60900
  • Low weight for good handling and fatigue-free work

Product design features

  • Slim design in strict accordance with the required insulating properties (material strength/overlaps)
  • Smooth transitions on switching and moving parts with ergonomic handle design and calibration notch
  • Uniform look even when using other components (e.g. red insulated sockets)
  • Attractive colour design of the housing and head with established VDE signal colours red/yellow
  • Handle colour in black to make a distinction with the colour and to prevent it appearing dirty quickly
  • No disturbing projecting parts (e.g. shift lever)
  • DIN EN ISO 6789-2:2017, DIN 3120, ISO 1174-1, IEC 60900:2018
  • Made in Germany
  • Output: Square, solid 10 mm (3/8 inch)
  • Dimensions / length: 305 mm
  • Protective insulation up to 1000V
  • Net weight: 0.64 kg
  • Nm min-max: 5 – 25 Nm
  • Tolerance: 4 %
  • Scale Graduation (Nm): 0.5 Nm
  • Effective torque wrench length min.-max. I1 mm: 238.00 – 232.00 Nm
  • Actuating force min.-max. kg: 2.1 – 11.0 kg
  • Number of teeth: 24 (Opening angle 15°)
ATTENTION:
Repairs may only be carried out by the HAZET Service Center, as repair works must be followed by a 10,000 V routine test in accordance with IEC 60900

Technical data

  • Actuating force min.-max. kg : 2.1 – 11.0
  • Effective torque wrench length max. I1 mm : 232 mm
  • Effective torque wrench length min. I1 mm : 238 mm
  • Length : 305 mm
  • Net weight : 0.64 kg
  • Nm min-max : 5 – 25
  • Number of teeth : 24 Zähne
  • Opening angle : 15 °
  • Output : Square, solid 10 mm (3/8 inch)
  • Protective insulation : Protective insulation up to 1000V
  • Scale graduation (Nm) : 0.5 Nm
  • Standard : DIN EN ISO 6789-2:2017, DIN 3120, ISO 1174-1, IEC 60900:2018
  • Tightening torque max. : 25 Nm
  • Tolerance : 4 %
  • Torque min Nm : 5 Nm
  • Total length : 305 mm

Print

Are you familiar with our HAZET spare parts shop?

To the spare parts shop

Should you require spare parts that are not listed in our sales documents or in our spare parts shop, please contact our service centre. Our service centre is also happy to be your initial contact partner for complaints.

Service Centre
Telephone +49 (0)21 91 / 7 92-355
Fax +49 (0)21 91 / 7 92-523
service-center@hazet.de

Office hours
Mon.-Thu.: 6.45-15.30 GMT
Fri.: 6.45-12.00 GMT

More interseting products

VDE flat nose pliers
VDE flat nose pliers HAZET-No.: 1816VDE-22
VDE screwdriver set
VDE screwdriver set Pozidriv profile PZ, Cross... HAZET-No.: 804VDE/14
Tool assortment VDE
Tool assortment VDE Number of tools: 14 HAZET-No.: 0-20/14
Torque wrench
Torque wrench Nm min-max: 2.5 – 25 Nm... HAZET-No.: 5108-3CT
Offset screwdriver set
Offset screwdriver set Inside hexagon profile ∙... HAZET-No.: 2105LG/9H