English
1⁄2″ Twin Turbo impact wrench ∙ 550 Nm
Angled ∙ L x W x H: 85 x 64 x 227 mm ∙ Loosening torque maximum: 550 Nm ∙ 1/2 inch square ∙ solid ∙ Powerful twin hammer mechanism
Product information
- Application:
Operating brake calliper screw connections as well as other hard-to-reach screw-joints - Loosening torque maximum: 550 Nm
- Exhaust air is guided through the handle downwards
- Reduced vibrations
- Easy handling
- Handle / trigger adjustable around its own axis for optimal handling allows operation in any position
- Swivel mechanism for extended application range guarantees best accessibility
- Short, compact, angled design – only 70 mm
- One-hand operation for left- and right-handed users
Variants
Technical Data
| Design ∙ Special feature |
|
| Loosening torque maximum | 550 Nm |
| Manual/impact operation |
|
| Tightening torque maximum | 500 Nm |
| Output |
|
| Net weight | 1.3 kg |
| Striking mechanism (type) |
|
| Air requirement | 113 l/min |
| Forward and reverse |
|
| Recommended torque | 450 Nm |
| Handle | |
| Hose diameter (recommended) | 10 mm |
| Vibration acceleration | 4.89 m/s2 |
| Dimension | 85 x 64 x 227 mm |
| Sound pressure level | 90.1 dB(A) Lp A |
| Revolutions per minute | 8000 |
| Thread type air inlet |
|
| Air connection inlet |
|
| Loosening torque (maximum) determined with screw size M | 16 M |
| Coupler plug |
|
| Sound power level | 101.1 db(A) Lp W |
| Air requirement [l/sec] | 1.9 l/sec |
| Working pressure (bar) | 6.3 bar |
